How To Fix TV Dish Antenna - NK's Methods

Friends, if you have a TV installed in your house then you must read this post.
What actually happens is that when there is a storm or rainy season, the signal in our TV goes away. Our dish antenna moves a little from its place due to the wind, due to which its frequency does not match and we see no signal on the TV. gives.
Today I am going to tell you how you can get full signal in your TV instead of no signal. I will tell you how you can fix your dish antenna and how you can watch all the channels easily without any hassle.

Things You Will Need

•  NOTHING

Method

To fix the dish antenna, first of all you have to click on the signal option from the remote in the box of your free dish. Now see how much signal is coming on your TV screen. If the signal is weak then you have to check the signal on your rooftop. You have to go near the dish antenna and loosen the bolt and nut attached to the umbrella. Do not loosen it completely, loosen it a little. Now you have to move the dish antenna up and down, right or left.
You have to rotate the dish antenna where your channel turns green or more than 50% channels are available or the percentage of channels is more than 50. You have to tighten the bolt exactly at that place.
You will need two people to do this work. The first person will fix the disc on top. The second person will tell him how much signal is coming. If your TV is not getting full channels, on some channels there is more than 50% signal in the green line. Are coming and on some channels there is less than 50% signal coming in the green line, then you can solve this problem in this way, for this you have to delete all the channels, now you have to auto scan again. Once the auto scan is 100% complete, all your channels will start appearing again and all the channels will be in HD quality.
After setting the dish antenna, you can delete all the channels and auto scan again.
If you liked this post of ours then please share it with your friends. Thank you