If The Mobile Charger Has Stopped Charging Then Do This

At present everyone uses phones. In which usually the problem is seen that the charger of our phone stops working. Due to which the phone is not able to charge. Phone chargers are easily available in the market and at low prices, due to which people buy a new charger and do not pay attention to the bad charger. But if you keep a few things in mind, you may not need to buy a new charger.

 

What could be the reason why the charger does not work -
Sometimes the phone charger does not work, but there can be many reasons for this problem. For example, the charger gets burnt, its wire gets broken or sometimes there may be a problem in the circuit inside. It is possible that due to all these problems, your phone's charger is not working, but before getting a new charger, you should try repairing your charger yourself.

 

Things You Will Need

• Screw Driver
• Resistance
• Soldring Iron
• Small Wires
  

Method

First of all you have to check whether your charger is damaged internally or there is a problem with its data cable.
If there is a problem with the data cable, then first of all you will have to change the data cable.

If the data cable is correct, you will have to remove the charger. To remove the charger, you will have to remove the small screws at the back of the charger.

Now first of all you have to check the resistance and capacitor in the charger to see if any is broken. In most cases, the resistance gets damaged, which you can change with the help of a soldering iron.

Many times dust gets into the jack of the charger, due to which the charger does not work, so clean it thoroughly.

Besides this, many times the pin inside the jack becomes crooked, due to which it can be corrected with a sharp object.

If the jack is shaking, it can be easily repaired by taking it to the repair center. Along with this, check the wire carefully near the pin of the charger.