How To Make Rechargeable Emergency Light For Home
There is a lot of problem of light these days. Whenever the light goes off, it is very important for us to keep emergency light at home.
Everyone has emergency lights in their homes but they get damaged within a short time. The emergency lights available in the market are very expensive and they get damaged after a few months.
So today I will teach you how to make an emergency light with high backup at very low cost, for this you will not need to bring much material.
Things You Will Need
- LED Strip - 1
- Red LED – 1
- Resistance 50 to 100 ohms – 1 watt (1 piece)
- mobile or laptop battery
- in4007 diode
- Box
- Charging Socket
Method
To make an emergency light, first of all you will need a box. You can easily buy this box from the light shop for ₹ 20. After this you have to buy a strip of 10 white LED bulbs.
You can buy this LED strip with 5V.
You have to buy a small red colored bulb. You have to buy this bulb because when we put the emergency light on charging, we should know that our emergency light is being charged.
You need a resistor because the red bulb is very small and plugging it directly into the battery will destroy it.
You need IN007 diode to charge the battery. This diode is necessary to charge your battery.
You will need a charging socket so that you can charge the emergency light later.
Now I will teach you how to make an emergency light. First of all, you have to stick the LED strip well on the top of the box with the help of glue.
Now you have to take two small pieces of wire and solder the red wire to the plus one and the black wire to the minus one with the help of a soldering iron.
You have to take both these wires inside the box, now you have to stick the battery inside the box with the help of glue.
You can use the battery of a laptop or a damaged mobile. You have to take out the plus and minus wires from the battery. You will need a switch which will work to switch the LED bulb on and off.
You have to make a hole in the charging socket in the box and put feet in it and apply glue inside it so that the socket does not move in or out.
You have to make another small hall and install a red colored bulb in that hall. You have to install resistance along with the red colored bulb.
You can make the wire connections as per the diagram below
You can buy this LED strip with 5V.
You have to buy a small red colored bulb. You have to buy this bulb because when we put the emergency light on charging, we should know that our emergency light is being charged.
You need a resistor because the red bulb is very small and plugging it directly into the battery will destroy it.
You need IN007 diode to charge the battery. This diode is necessary to charge your battery.
You will need a charging socket so that you can charge the emergency light later.
Now I will teach you how to make an emergency light. First of all, you have to stick the LED strip well on the top of the box with the help of glue.
Now you have to take two small pieces of wire and solder the red wire to the plus one and the black wire to the minus one with the help of a soldering iron.
You have to take both these wires inside the box, now you have to stick the battery inside the box with the help of glue.
You can use the battery of a laptop or a damaged mobile. You have to take out the plus and minus wires from the battery. You will need a switch which will work to switch the LED bulb on and off.
You have to make a hole in the charging socket in the box and put feet in it and apply glue inside it so that the socket does not move in or out.
You have to make another small hall and install a red colored bulb in that hall. You have to install resistance along with the red colored bulb.
You can make the wire connections as per the diagram below
When your wire connections are complete, you will see that your emergency light is dimming very well. Once you fully charge the battery, after that you can easily use this light to make this light. You will need very little expense and you can easily make this emergency light.
And if you liked our post then please share it with your friends. Thanks
And if you liked our post then please share it with your friends. Thanks
Type Here Any Comments & Suggestions ...