How To Install Regulator In Fan - NK's Methods

Hello friends welcome to my website
Today we are going to talk about how the regulator is installed in the fan. When it is winter or rainy season, we need less fan, but when we need it, then when we run the fan, it runs at a very high speed, hence We need to install a regulator in it. The job of the regulator is to regulate the speed of the fan.
There are different types of regulators. The job of all types of regulators is to regulate the speed. In old times, the regulator in the fan used to come in a very big box.
But with time, the size of the regulator has also changed, now the regulator has started becoming equal to the switch.

 

Things You Will Need

• Regulator 
• Screw Drivers
• Tester
• Extra Wire

Method

One advantage of installing a regulator is that we can control the speed of the fan as per our wish. Now we will know how to install the regulator in the fan. First of all you have to separate the wire coming from the fan from the switch board. Now follow the steps given below. The wires have to be connected by looking at the given picture.

 

After connecting the wires, you have to close the switch board. You should turn off the line while doing this work.
You should do this work very carefully.
One more important thing, if you liked this post of ours then please share it with your friends.